ConfigWiz - 3D Printing

3dp_cli_format

Determine CLI file format: ASCII or binary. Controls CLI file format (ASCII or binary) for 3D printing

Default: binary

3dp_discard_empty_base_slices

Set this parameter to "Yes" to ignore any empty slices between the tray and the bottom surface of the model. Ignores empty slices between tray and model bottom

Default: yes

3dp_ignore_lattice_for_support

Use this option to ignore all lattice structures while creating the supports. Excludes lattice structures when creating supports

Default: yes

3dp_ignore_lattice_volume

Ignore the lattice volume for model position on the tray. Controls if lattice volumes affect model position on tray

Default: no

3dp_multiple_cli_files

Create one CLI file for the solid geometry, and a separate CLI file for each lattice structure. A CLI file will always be created separately for the support structures. Creates separate CLI files for different model components

Default: yes

3dp_multithread_slicing

Use multithreaded calculation during slicing. Select from 1 (single thread) through 8 CPUs for calculation. Enables parallel processing during slicing operations

Default: 1

3dp_slice_location

Set the height of the slicing within each layer. Sets slice height within each layer (base, mid, or top)

Default: base

3dp_slicing_layer_height

Determine the height of each layer in the slicing process, in mm. Defines layer height (mm) for the slicing process

Default: 0.15

3dp_slicing_set_minz_value

Determine at what height above the tray (in mm) the slicing operation begins. Sets starting height above tray for slicing operation

Default: (No Value)

display_lattices_in_hq

Improve the quality of shaded representation of simplified lattices. Improves shaded representation quality of simplified lattices

Default: yes

display_thick_lattices

Display beams of simplified lattices in shaded representation. Displays beams of simplified lattices in shaded representation

Default: yes

lattice_points_in_simulate_only

Display lattice open boundary point sets in Simulation mode only. Controls display of lattice boundary points in Simulation mode

Default: yes

print3d_3mf_lattice_ext

Use the 3MF Lattice extension for applicable lattice structures. To benefit from this extension, convert your lattice features to simplified representation. Enables 3MF Lattice extension for lattice structures

Default: yes

print3d_bound_offset

Sets the default offset from the tray box in all directions when placing models using auto-position or nesting (5.0 is set as algorithm default value). Sets offset from tray box for auto-position and nesting

Default: 5

print3d_enable_tooltips

Show tooltips with information about materials, when hovering over a component. Shows material tooltips when hovering over components

Default: no

print3d_floor_offset

Defines the default height offset from the tray floor, in mm, when placing models using auto-position or nesting. Sets height offset from tray floor for model placement

Default: 1

print3d_load_printers_dir

Set the path to directory containing list of user-defined 3D printers. Specifies directory for user-defined 3D printers

Default: (No Value)

print3d_material_lib_path

Sets the default directory for 3D Printing part material library. Use full pathname to avoid problems. Sets directory for 3D printing material library

Default: (No Value)

print3d_min_gap_color

Specifies the color that narrow gaps are highlighted. Sets highlight color for narrow gaps in 3D printing

Default: 255 160 255

print3d_min_gap_tolerance

Tolerance for gap analysis. Sets tolerance for gap analysis in 3D printing

Default: 0.02

print3d_min_gap_width

Minimum acceptable gap for gap analysis. Defines minimum acceptable gap for printability

Default: 0.2

print3d_min_wall_color

Specifies the color that thin walls are highlighted. Sets highlight color for thin walls in 3D printing

Default: 0 255 160

print3d_min_wall_tolerance

Tolerance for wall analysis. Sets tolerance for wall thickness analysis

Default: 0.07

print3d_min_wall_width

Minimum acceptable wall thickness for wall analysis. Defines minimum acceptable wall thickness

Default: 0.7

print3d_offline_materials_dir

The root directory for 3D printing mateirals offline data. Sets root directory for offline material data

Default: (No Value)

print3d_offline_materials_use

Use 3D printing materials offline data. Controls use of offline material data

Default: no

print3d_stl_allow_negative_vals

Allow negative values in the STL file format. Allows negative values in STL export

Default: yes

print3d_stl_export_angle

Angle control default value for STL export. Sets angle control for STL export precision

Default: 1

print3d_stl_export_chord_height

Chord height default value for STL export. Sets chord height for STL export precision

Default: (No Value)

print3d_stl_export_multibody

If the design model contains multiple bodies, a separate STL file will be exported for each body. A .zip file will be created. Exports separate STL files for multiple bodies

Default: yes

print3d_stl_export_separately

Choose this option to export the models body, lattice, and support structure separately for printability purposes. A .zip file will be created. Exports model components as separate STL files

Default: yes

print3d_stl_export_step_size

Step size default value for STL export (-1.0 to use algorithm default). Sets step size for STL export precision

Default: -1

print3d_stl_export_type

Specifies the format of the exported STL file. Controls STL file format (ASCII or binary)

Default: binary

print3d_stl_prop_chord_height

Use maximum chord heights proportional to component sizes. Scales chord heights proportionally to model size

Default: yes

print3d_stl_prop_step_size

Use maximum step sizes proportional to component sizes. Scales step sizes proportionally to model size

Default: yes

print3d_stl_ud_angle

Use angle from the configuration dialog, rather than default. Uses user-defined angle for STL export

Default: no

print3d_stl_ud_chord_height

Use chord height from the configuration dialog, rather than default. Uses user-defined chord height for STL export

Default: no

print3d_stl_ud_step_size

Use step size from the configuration dialog, rather than default. Uses user-defined step size for STL export

Default: no