Creo Configuration Management Tool
Showing category for Creo
Should merge feature put copied items in target model on layer driven by rule
Adds an offset dimensions to constraints that were created without an offset during the dragging of a component
Control the appearance of the intersection tool and scope of available functionalities
Allow freezing failed assembly components
Sets what type of children packaged components can have. ALL - Features and components can be a children of packaged component. FEAT - Only features can be children of packaged components. NONE - Packaged components cannot have children
Yes - Displays the ReIntersect command in the ASSY FEAT menu
Allows the option to save a copy of the active model as a family table instance
Yes - Failed models can be saved. No - Failed models cannot be saved. Prompt - Let the user decide whether failed models can be saved
Allow updating part Simplified Rep data in session automatically when switching from one Simp Rep to another. Yes - Allow updating part simplified rep data. No - Do not update part simplified rep data. Prompt - Prompt the user if the current simplified rep should be updated
Yes - Enables automatic assembly. No - Disables automatic assembly
Control whether auto constraint should create offsets. Yes - Auto constraint always creates offsets. No - Auto constraint snaps align or mate if surfaces are within tolerance. Never - Auto constraint never create offsets
If the option is "yes" newly created rep would be updated each time on retrieve/regeneration
Automatically expand the tree to locate selected object or use a command to do so
Set the default value for the maximum number of matches allowed
Control the appearance of the intersection tool and scope of available functionalities
Assembling components with an interface will automatically place the component at the first position satisfying the interface definitions. Disable for huge assemblies
Yes - Update the resulting Boolean feature according to the placement of the modifying component in boolean operations. No - Don't consider component placement
Yes - Copy Datum planes to the modified model as a part of boolean operation. No - Don't copy datum planes
Yes - Copy Quilts to the modified model as a part of boolean operation. No - Don't copy quilts
Sets the default Boolean operation for models.Values: add_Bodies,merge,cut,intersect,model_type. When set to "model_type" the default Boolean operation will depend on the type of the model: if invoked in Assembly-use Merge, if invoked in Part-use Add Bodies
Yes - Delete modifying components after Boolean operations. No - Keep modifying components
Yes - Transfer all the references from the modifying component to the resulting boolean feature. No - Don't transfer references
Determines whether or not revision number is increased for generic models that regenerate and change during assembly retrieval. Only applies if new_asm_regen_revnums is yes (otherwise, there will be no revision number bumping)
Controls whether to enable snapping to missing references while dragging components for placement. Yes - Snapping is enabled while dragging. No - Snapping is disabled while dragging. Disable for huge assemblies
Check for interfaces when placing a component
Show only matches that do not interfere with other components
Determines whether to permit different names for different part occurrences, or not in mirror subassembly UI
Sets the size filter default value as a percentage of the overall assembly size
Specifies the angle epsilon such that if the desired surfaces are equal or greater than the epsilon (in degrees), than an angle offset constraint will be created
Sets the initial assembly placement behavior when assembling a new component. Default - Default initial position. Package - Define initial position using the Move option. Constraint_in_Window - Use secondary window. Move_then_Place - Define initial position using the Move option and then define placement constraints
Use placement assumptions when placing components
Sets the accuracy for the selection of external components based on graphic computation
No - Assembly is not rolled back when the user redefines a component
Yes - Flags independent copy geom features in a pre-2000i model as modified when retrieved into Creo. Save the model immediately to update the model's copy geom dependency information
Sets the default copy geometry reference(s) type
Allow the automatic creation of interfaces based on previous assembly instructions
Display inactive assembly components using phantom transparency and default color (grey). Default value is shade_only. Disable for huge assemblies
Issue successfull regeneration messages for assembly models
Enables advance collision settings usage. Enables advanced collision detection in assembly or mechanism mode (e.g., a 'Stop when colliding' option during component drag), which helps in identifying interference by halting movement on contact
Yes (default) - Enable Creo Simulation Live. No - Disable Creo Simulation Live
Enable drag and drop operations for components and features. Select 'All' to allow all operation. Select 'All and confirm' to display a dialog box to confirm in case of restructure. Select 'Reorder' to disable restructure and allow only reorder operations
Allow underconstrained components as mechanism connections
Expose all inseparable assemblies operations like "Embed", "Extract", "Create Embedded". Added in Creo 8
Enable user assignment of materials to bodies
Yes - Global Reference Viewer will show objects with external references only; No - all the objects will be visible
Yes - When using a copied geom feature or a backed-up external reference with the Design Manager, and the reference is missing in the original, then the copied geom feature fails. No - The feature freezes and does not update
Set to yes to be able to search by Point feature created with Offset Coordinate System option, using names of its points
Sets remnant removal ability for the ReIntersect command in the ASSY FEAT menu. Yes - You can remove remnants. No - You cannot remove remnants
Update mass properties parameters even when some of the components of the assembly are not in master rep
Sets the default view the reference view starts with - Dependencies or References
Ignores nondisplayed items when searching the component interface during component placement
Includes sub model interfaces as possible references for interface to interface component placement
FAIL_PLACEMENT - Fail regeneration upon component interface criteria mismatch. WARNING_ONLY - A warning message is given during regeneration for the criteria mismatch only without failure. IGNORE - Interface criteria mismatch ignored during regeneration
Enables the modification of the value of offset dimensions during component dragging
Yes - Allows adding an MP_DENSITY column in FT when a material is assigned to a model. When set may cause the same material to have different values for the Density parameter in different instances. Does not affect legacy models
If set to "Yes" Creo will automatically convert units in materials from a library to the model system of units
Yes - Use Component Chooser base Simp Rep UI, No - Use old Simp Rep definition UI
Action to take for packaged components in Assembly mode. Update - Updates components if assembly changes. Freeze - Does not move components if assembly changes. Disallow - Does not allow packaged components in assembly (must be fully constrained)
Control whether alert dialog is given when packaged component is referenced. Yes - Allow alert when a packaged component is referenced. No - No Alert is given when a packaged component is referenced
Yes - During component placement, component being assembled will retain its normal colors. No - During component placement, component being assembled is shown in preview color. Preserves component colors during placement preview
Specifies whether or not the notebook will be automatically regenerated upon assembly regeneration
Sets the naming convention used when replacing components
Set the default order of the history evaluation rule in the replace operation. Disable - the evaluation rule will be disabled by default. Number - set the order of the rule relative to other evaluation rules
Set the default order of the interface evaluation rule in the replace operation. Disable - the evaluation rule will be disabled by default. Number - set the order of the rule relative to other evaluation rules
Set the default order of the same id evaluation rule in the replace operation. Disable - the evaluation rule will be disabled by default. Number - set the order of the rule relative to other evaluation rules
Set the default order of the same name evaluation rule in the replace operation. Disable - the evaluation rule will be disabled by default. Number - set the order of the rule relative to other evaluation rules
Set the default order of the same parameters evaluation rule in the replace operation. Disable - the evaluation rule will be disabled by default. Number - set the order of the rule relative to other evaluation rules
Determines whether to retrieve the dependencies of the generic when an instance is retrieved
Will control default option when setting a model or component as the current object
Sets the search scope for children when entering the reference viewer. Session - Search all objects in session. Window - Search objects in the active window only
Defines the search area for the component interface as a percentage of the component size during component placement
Expands search to include models that have not been retrieved into session. If Yes, models will be brought into session possibly causing performance issues
Yes - If the components used in the assembly instances are themselves generics, the systems asks if you want to choose an instance as each component is retrieved. No - The generic model of the component is retrieved automatically
Yes - Interference will be shown automatically, No - interference will not be shown automatically
Displays the Shrinkwrap alert the first time the quality level is increased. Removes the warning about shrinkwrap when moving past 1
Defines whether simple search executes query only inside selected models (if some models selected) or always in scope of entire top-level model
Determines the default model status while defining a new simplified rep
Determines the rep to be retrieved when selecting a reference. Automatic Retrieves the minimum rep required to perform the operation
Determines on-demand retrieval behavior in simplified representation views. Prompt - Ask for confirmation before retrieving on-demand. Never_prompt - Retrieve models on-demand automatically with no confirmation. Disabled - on demand is disabled
Specifies the color Creo uses to display new skeleton models. The three decimal values ranging from 0 through 100 specify (in order) the percentages of red, green, and blue in the resulting color. For example, 0 0 49 specifies medium blue. Sets the default color for skeleton models
Enables the dynamic snapping to constraints during the dragging of components. Disable for huge assemblies
Yes-Copy Geometry will try to update location of copied geometry based on changes to component placements even if some components are excluded or in graphics rep
"Yes" updates top assembly simplified reps for replacements during regeneration and upon replacement
Control the usage of 3D thumbnails when retrieving in light weight graphic representation. Disable for huge assemblies
Transform analysis default behavior: use active model CSYS and units or not
Specify whether sub-model annotations will be visible in assemblies. If set to "Active model only", only annotations of the active model will be visible. If set to "All", all annotations in sub-models will also be displayed. Annotation display in part mode is not affected