ConfigWiz - Electromechanical

align_cable_bundles

Align NEWLY CREATED bundles where they meet or branch out

Default: yes

allow_bundle_flat_cables

Allow to create a bundle over a group of flat packing cables

Default: no

allow_harn_mfg_assy_retrieval

Allow to retrieve a harness mfg assembly directly

Default: no

allow_logical_spool_editing

Yes - Allow logical data spool parameters to be edited and the spool name to be renamed

Default: no

assemble_parent_connector

Assemble parent connectors on locations referencing a subconnector

Default: yes

auto_assign_marker_designation

Automatically assigns the name of the default marker feature as a designation label to create a designated feature. Yes - Automatically assigns the marker feature name to the marker feature tool. No - Does not automatically assign the marker feature name to the marker feature tool to create a designated feature

Default: no

auto_assign_tiewrap_designation

Automatically assigns the name of the default tie wrap feature as a designation label to create a designated feature. Yes - Automatically assigns the tie wrap feature name to the tie wrap feature tool. No - Does not automatically assign the tie wrap feature name to the tie wrap feature tool to create a designated feature

Default: no

auto_convert_cables

Yes - When regenerating a pre-Release 11.0 cabling assembly, the system automatically creates a separate spool feature for every individual wire or cable in the assembly. No - An interface for the cable conversion appears

Default: yes

auto_xml_on_retrieve

Automatically load Cabling Logical Reference from an XML file when retrieving the cabling assembly

Default: no

auto_xml_on_save

Automatically create an XML Logical Reference when saving a cabling assembly

Default: no

autoroute_path_param_name

Set the wire parameter to use to select a path during autorouting

Default: use_path

bundle_transition_create_method

Control whether bundle transitions are created automatically. Default is automatic

Default: (No Value)

cable_bundle_transition_length

Transition length is controlled by the formula Larger Diameter X <percentile>. Default value is 50[0...250]%

Default: 0.5

cable_int_portions_for_clr

No - Global clearance checking for internal cable portions is excluded. Yes - Global clearance checking for internal cable portions is included

Default: no

cable_jacket_termination

Ports - Cable jackets are routed between the entry ports. Network Ends - Cable jackets are terminated at the network ends

Default: network ends

cable_location_override_color

Override the system color of cable locations. Enter RGB values between 0 and 255 separated by space

Default: (No Value)

cable_segment_override_color

Override the system color of cable segments that do not have a color map. Enter RGB values between 0 and 255 separated by space

Default: (No Value)

cable_stripes_file

Sets the path for the striped appearance (.csv) file

Default: <installation-path>\text\cabling_data\striped_cable\cable_stripes.csv

cables_reorder_ref_des_len

Specify the default leader length (in model units) of reference designator labels when using 'Reorder Reference Designators' operation in Cabling. Added in Creo 10

Default: (No Value)

cables_with_hlr

Cables are not hidden behind objects

Default: yes

cabling_split_multi_pnt_locs

Setup whether to convert multiple-location features into single location features

Default: yes

compact_cables_packing

Setup whether the new packing of cables should be applied

Default: no

compare_spools_by_name

Compare spools by names in logical compare

Default: yes

cti_class_color_file

Sets the CTI class color file for CTI class color display during electrical clearance and creepage analysis. Use the full pathname to avoid problems

Default: (No Value)

diagram_export_allow

Allows saving a copy of opened diagrams as a DGE file for using in Creo Schematics

Default: yes

diagram_pin_edit_multi_line

(Diagram) Determines the Pro/TABLE format used when you are modifying pin parameters. "yes" - You can add user-defined pin parameters by including them between the DEFINE and ENDDEF statements for each pin. "no" - The system uses columnar format and

Default: no

display_duplicate_harness_msg

Display warning message when duplicate harness are identified in the same assembly

Default: yes

display_internal_cable_portion

Yes - Internal cable portions will be displayed for any wires that have been manually set to Yes in the Cable Paths Setup dialog box for each individual splice and custom component. This option can be overridden in the Environment dialog box

Default: no

display_route_cable_preview

If no then Route Cables tool does not display preview of cables as they are routed. Otherwise Route Cables tool will show a preview of the path routed cables will follow

Default: yes

display_thick_cables

Yes - Display cables and wires with thickness. No - Display the centerline of cables and wires only. This option can be overridden in the Environment dialog box

Default: no

edit_cable_stripes_file

Yes - Allows user to define new appearances, and edit and save appearances locally on their machine. No - User can use appearances created by the librarian. Only librarian can define stripped appearances

Default: yes

enable_cable_channel

Activates channel functionality

Default: no

fan_significant_locations_only

Setup whether only significant locations should be flattened on flattening a harness

Default: yes

fan_with_network

Setup whether the network should be included on flattening a harness

Default: yes

freeze_failed_cable_locations

Suspends the cable location at its last known assembly location

Default: no

full_hlr_for_cables

Full - Removes hidden lines from view when cables hide other geometry (use when Hidden Line active). Partial - Cables hide other non-interfering cables except when cables route together between same locations. None - Display hidden lines (faster)

Default: full

harn_mfg_branch_angle

Sets the default value for the branch location angle for the harness manufacturing. Enter a value between 10 and 130

Default: 80

harn_start_model_dir

Provides the complete path to the directory containing harness start parts and assemblies. Sets directory containing harness start parts and assemblies

Default: (No Value)

harn_tang_line_display

Display the tangency lines between cable segments in thick cable display mode

Default: yes

hlr_for_xhatches

Controls whether HLR to be enabled for crosshatches in drawing mode

Default: no

ignore_bundles_in_find_cables

Include bundles and overbraids in the query results when the model or logical data is queried for unrouted items

Default: no

limit_ref_des_label_reorder

Restricts the refitting and reordering of manually positioned reference designator labels when using Refit and Reorder operations

Default: yes

network_location_override_color

Override the system color of network locations. Enter RGB values between 0 and 255 separated by space

Default: (No Value)

network_segment_override_color

Override the system color of network segments. Enter RGB values between 0 and 255 separated by space

Default: (No Value)

orthogonal_snap

Controls non-90 degree routing in Pro/DIAGRAM. Yes - Turns the Ortho Snap function on. You can sketch wires only at the default horizontal and vertical orientation. No - Enables you to sketch wires in drawings at angles other than the default. Controls ability to draw non-orthogonal lines in diagrams

Default: yes

pro_cbltrm_dir

Sets the directory from which terminators are retrieved. Use the full pathname to avoid problems. Sets directory for retrieving terminators

Default: (No Value)

pro_spool_dir

Sets the directory from which spools are retrieved. Use the full pathname to avoid problems. Sets directory for retrieving spools

Default: <working-directory>

prompt_add_to_main_bundle

Prompts the user if to automatically add a selected cable to the main bundle in addition to the branch bundle

Default: no

prompt_extract_from_branches

Prompts the user if to automatically extract a selected cable from the branch bundle too

Default: no

report_end_splice

Setup whether the terminal splices of cables are reported

Default: no

ribbon_cable_flat_direction

Flat ribbon cables in the y-axis of entry ports

Default: y_axis

smaller_bundle_min_bend_rad

Setup whether to consider the thickness of the bundle when set up the minimum bend radius

Default: no

template_flat_harness

Specify the model used as the default flattened Harness assembly template

Default: (No Value)

template_harnesspart

Specify the model used as the default Harness part template

Default: (No Value)

terminator_table_out_unicode

YES - Unicode strings are exported in terminator table files, NO - Unicode strings are converted to ASCII characters for terminator table export

Default: yes

trace_thru_splice_connector

Report the from/to connectors of cables passing through splices correctly

Default: no

update_harness_mfg_line_color

Update cable line color for harness-mfg part created in release 2000i or earlier

Default: no

update_loom_bundle_data

Setup whether to update loom bundle data from old harnesses

Default: no

update_pre_130_harness

Yes - When a cable is added between two previously laid out locations in a three-dimensional reference harness, display of the new cable will update automatically in pre-Release 13 flattened cable models

Default: no

update_pre_16_cable_layers

Yes - Harnesses containing cables routed prior to Release 16.0 will be automatically updated upon retrieval to comply with new display standards

Default: no