ConfigWiz - Hatch Patterns

hatch_pattern_auto_rotation

Sets the method to assign hatch patterns angles to different sectioned components in a section view. Legacy - allows any angle. 6_angles - limits allowed angles to 6 variations. 2_angles - limits allowed angles to 2 variations. Added in Creo 9

Default: 6_angles

hatch_pattern_convert_all_xch

Specifies whether to convert only visible non-solid hatch patterns or all patterns when applying the Convert All XCH to PAT command. Visible - only visible non-solid patterns are converted. All - Solid, excluded and hidden patterns are converted as well. Added in Creo 9

Default: visible

hatch_pattern_convert_disp_gal

Specifies which hatch galleries display patterns converted from XCH to PAT. Added in Creo 9

Default: drawing

hatch_pattern_max_update_time

Sets the longest allowed time, in seconds, it takes to update the hatch display after changing one of its settings. Added in Creo 9

Default: 3.5

hatch_pattern_rotation_interval

Specifies the angle interval when you rotate a hatch pattern using rotation commands. Enter an integer between 1 to 180. Added in Creo 9

Default: 15

hatch_pattern_scale_in_drw_view

Defines the default scale value of a hatch pattern when applying it to a new section in a drawing view. fit_to_view- Uses the base value defined by the scale configuration file and scales it to fit the view outline. fixed- Uses the base value defined by the scale configuration file. Added in Creo 9

Default: fit_to_view