Creo Configuration Management Tool
Showing category for Creo
Adds MULTAX/ON in DEFSUB for the NC subroutine
Allows a manufacturing model to be opened in assembly mode from the file open dialog. Use "Open In Assembly Mode" option in "File Open" dialog
Considers the safe radius while generating a toolpath in a milling NC sequence, even if it is less than the part accuracy
No Default Application set for opening Assembly NC Models
Storage directory for holemaking MUDF's that are used by Pro/NC Auto-drilling functionality
Retrieve automatically and load the configuration file for the auto-drilling table
Parameter name included in hole features of a manufacturing reference model. The parameter value identifies the MUDF for holemaking that is automatically applied in Pro/NC to drill these holes
Maintains the coolant and spindle statements in a systematic order in the CL data in Back Drill NC sequence
Specifies the CAM-Post load point directory to enable you to directly set-up the post-processors and generate MCD files
Yes - Includes all reference part surfaces as check surfaces for profiling and pocketing NC sequences
Enables you to control the size of the tool path arrow for contouring NC sequences. 0 - The arrow does not display. Any other value - The arrow scales accordingly
TOOL or TABLE - defines ROTATE sign direction convention based with respect to either rotation table or cutting tool
Defines the file that contains the user-defined tool parameters' list
Enables default state of "Offset Cut" option for the trajectory sequence. "ON" - "Offset Cut" option is selected. "OFF" - the option is not selected. "AUTO" - the option state depends on the selected chain reference
Disables launching user interaction dialog whose default option is always "NO" which keeps the existing user defined parameter file definitions
Adjusts the adapter and tool length with respect to the tool travel
Yes- Display manufacturing icon for manufacturing assembly files in Open/Save dialogs. No- the manufacturing assembly files have assembly icons
Sets output of NC process information as content on the NC Assembly CAD Document in XML Format. Yes - Outputs the file whenever CAD Document is Saved. No - Does not output the file
Sets whether reference relationships will be created in Windchill between the manufacturing model and its deliverables(CL file, tape file and DMIS file)
Defines default end option for holemaking sequences. "AUTO" - end is determined automatically, "REFERENCE" - end is determined by the selected reference, "DEPTH" - end is determined by the specified depth, "THROUGH" - machine through the part
Defines default start option for holemaking sequences. "AUTO" - start is determined automatically, "REFERENCE" - start is determined by the selected reference
Enables selection of loops on surfaces for curve trajectory sequence
Honor and connect as per move specified in GOTO point of next sequence, in case of build operation. Added in Creo 9
Enables the 'Straight Cut' option in the classic Surface Milling NC sequence
Allows/disallows face option for thread turning sequence
Enables an improved combination of rules in Holemaking NC sequences
Outputs the name pattern instance in the NCL file and in the Model Tree in the <name of step instance-name of operation> format
Enable parameters and tool updation dialog
Enables adding "COMMENTS END" to indicate end of NC sequence/operation comments
Specifies the directory containing the post processor files to be used by Pro/NCPOST (GPOST)
Ignore pocket number from template for tools added to a workcell. Use first available pocket
Show/hide inapplicable cutting tools in mfg sequence UI
Enable/Disable auto referencing for Manufacturing template
Yes - In 3, 4, and 5 axis contour and conventional mill sequences, the entire reference part is selected as check surfaces by default when computing the NC sequence toolpath for those sequences. No - You select the check surfaces
Specifies distance between automatically created retract plane and step coordinate system. Will be applied to the new steps created in process manager if operation retract cannot be used
Refresh the graphics screen. Added in Creo 10
Yes - Avoids gouges when CIRC_INTERPOLATE parameter is set to ARC_ONLY or ARC_AND_POINTS when the arc is helical
Yes - take into account units for parameters used in CL command expressions
Yes - Output cl-file Japanese characters in EUC encoding
Controls the number of lines available for comments without scrolling in NC steps dashboard UI
Clears the "Automatic Update" intersection option while inserting a UDF into an NC assembly
Defines the file that contains the user-defined NC sequence parameters list. Added in Creo 9
Defines the file that contains the user-defined tool parameters' list
Yes - Uses the new customize dialog box for customizing NC sequences. No - Uses the Release 19.0 menus
Yes - Save / Retrieve Mesh for subsequent cutline recalculations, No - New Mesh will be computed for each cutline recalculations
Inherits sequence parameters from the site table while switching the drill cycle
The engraving toolpath skips the geometry center lines
Yes- Outputs the first and last collinear GOTO points of the same feed for a groove turning sequence in the NCL file
Sets the number of digits for i, j, k data points in a CL data file
top left /bottom right -Position of the mfg. Info dialog box
Enables you to make some of the APTn index topics modal, which means that you repeatedly get a list of major keywords corresponding to this topic upon completing a command line
YES - Optimizes the time required for editing the NC sequences. This option also optimizes the time required for editing existing tool motions and creating new tool motions
Do not copy any parameter of the tool to the sequence parameter tree
Controls the default state of the following option in Paste Special dialog: "Make copies dependent on dimensions of originals". This configuration option has an effect only for manufacturing assemblies
Enables a performance improvement of the NC pattern in the CL output
Specifies the directory where Mfg Process html page get stored. Use the full pathname to avoid problems
Specifies whether all steps created in the Process Manager get automatically synchronized with features in the Pro/NC assembly. You can change steps later in the dialog box open during the session
Specifies the directory where Mfg Process Table settings get stored. Use the full pathname to avoid problems
Specifies the directory where Mfg Process Templates get stored. Use the full pathname to avoid problems
Enables adding ZFEED for retract feed to reaming NC sequence
yes - Ask for confirmation before proceeding with stock model recomputation. no - Cancel stock model recomputation with no confirmation. auto_compute - Recompute the stock model automatically with no confirmation. Added in Creo 9
Specifies the directory which contains all manufacturing related setup files for the current session
Displays the corresponding solid tool used for the playpath when using the CL player
Sets the default visibility status of the Stock Model after creation
The factor is used to consider the threading of tapping tool. The estimate removed material value of tapping sequence is presented as estimate removed material value multiplied by this factor. The factor should be greater than 0 and upto 1.0
Controls whether the mfg tool comment is getting copied from TOOL_COMMENT parameter of the retrieved tool to the tool manager table comment
Specifies the storage directory for NC templates. Specify full path to avoid problems. NC templates are used in Expert Machinist. Templates store the recipe for a toolpath as the method of tool retrieval
Specifies the XML based file to setup Tool Dialog
Enables preview of a milling tool at a specified location on the tool path or geometry of the part
Turn profile preview and actual turn profile display will be considered in both direction of start and end for turn profile edit
Specify name and path of the file containing udf and mfg criteria values
Generates a helical toolpath with constant pitch in Volume Milling
Controls the workpiece transparency in shaded model display. You can change the value in the range between 0.1 and 1. The bigger the value, the more transparent the workpiece. The default value is 0.5
Sets the number of digits for x, y, z data points in a CL data file
Location of the setup file that describes which process parameters are included in the parameter table
Location for storing the report and images generated by the shop floor documentation tool
Location for documentation setup files that describe which process parameters are included in the parameter table
Location of the style sheet and default images used for shop floor documentation
Yes - make "Submit Path" and "Abort Path" visible. No - make "Submit Path" and "Abort Path" invisible
ModuleWorks will be used for NC material removal simulation
Sets the default file extension for Pro/MFG CL data files. Enter the file extension only (without the preceding "."). For example, apt produces filename.apt
Sets path for storage and retrieval of stock instances for creating workpiece in NC Model. Specify full path, including part name, to avoid problems
Sets path for storage and retrieval of stock instances for creating workpiece in NC Model. Specify full path, including part name, to avoid problems
Set to GPOST to access the default post processor supplied with Pro/NCPOST
Yes - Create out bound curve
Allows to use New turn scan types for Turning NC sequences
Allows export/import mfg model to/from xml file. Yes - make Export/Import options visible. No - make them invisible
Sets the default directory for the Machinability Database (MDB) files. Use the full pathname to avoid problems
Sets the default directory for the manufacturing CL data files.Use the full pathname to avoid problems
Specifies the directory where the manufacturing clamps can be found
Sets the default directory for the manufacturing parameter files. Use the full pathname to avoid problems
Sets the default directory for the manufacturing TAPE data files.Use the full pathname to avoid problems
Sets the default directory for the manufacturing tool files. Use the full pathname to avoid problems
Sets the default directory for the manufacturing workcell files. Use the full pathname to avoid problems
Sets the default directory for the syntax menu files in Pro/MFG. Use the full pathname to avoid problems
Affects CL-Data output for profile milling sequences. Yes - Sequence parameter output_point is available with options: tip - Toolpath is output with respect to the tool center; on_profile - Toolpath is output with respect to the profile of the tool
Enter directory path to NCPost database file
Enables toolpath computation on a separate host machine. Required values are Processor name, Remote machine's hostname, Type of transport (always 0), RPC processor number (same as that of remote processor), Version of queue manager
Removes the NC pattern instance name from the Pro/TABLE of the drawing
If the option value is 1, the tool path is obtained from standard one by reversing it; if the option value is 2, the tool path starts from an inner circle
No - Does not process reference parts when generating the shaded image (to save time). Yes - Shades reference parts when generating shaded images. Use this to save memory
Adds the RAPID command to the CL output file when avoiding a clamp in PUNCH
Specifies how tool path information is computed. Yes - Tool path information stored in file filename.tph (filename is manufacturing model name). No - Tool path is computed each time manufacturing model is retrieved or parameters are changed
Suppress HSM toolpath calculation progress window. Added in Creo 9
Enables the "Use breakout distance" option in the Tapping NC sequence
Controls the number of rows visible in the tool motion list without scrolling. This value is applied to dashboard based NC Steps
Sets tool path preview default mode to OFF
Yes - Tool holder interference will be ignored during Turning toolpath calculation
Uses MMKS unit system while creating ejector pins
Specify name and path of the file containing workcell and fixture name info
Cut out are created in Workpiece but not the family table instances