Creo Configuration Management Tool
Showing category for Creo
Yes - Allows a solid to be displayed with hidden lines while in perspective
Animate the transition between component states in placement
Animate the transition between explode states and mold opening steps
Yes - Transparent colors will appear using alpha blending (if supported) when the model is shaded. Turning this off (no) disables alpha blending for transparent objects. This can improve performance in scenes with many transparent components (at the expense of visual realism) by simplifying how transparency is rendered
Yes - Displays the model as a solid when shaded and clipped. No - Displays the model as surfaces when shaded and clipped
Yes - Display clipping after Visibilities dialog box is closed
Specifies the shape of datum point symbols displayed in Part or Assembly mode
Specifies a number of shades of gray to show shading of non-colored objects
Complete path to the scene file to be used as default scene file
Displays the names of components in symbolic representations
Wireframe - All solid edges in white. Hiddenvis - Hidden lines in grey. Hiddeninvis - Hidden lines removed. Shade - Display shaded surfaces. Settings are reflected in printing and some export modes
Displays or hides datum axes
Displays or hides datum axis name tags
Yes - Coordinate systems will be displayed. No - Coordinate systems will not be displayed
Yes - Coordinate system name tags will be displayed. No - Coordinate system name tags will not be displayed
Yes: display of the florin (international currency symbol) where possible. No: use the euro symbol exclusively
Yes - Datum plane name tags will be displayed. No - Datum plane name tags will not be displayed
Yes - Datum planes will be displayed. No - Datum planes will not be displayed. Turn them off for loading larger assemblies
Yes - Datum point tags will be displayed. No - Datum point tags will not be displayed
Yes - Datum points and their names will be displayed. No - Datum points and their names will not be displayed
Sets the display of silhouette edges for wireframe display only. Use this to save memory
Controls the display of dimension z-extension lines. Yes - z-extension lines will be displayed; No - z-extension lines will not be displayed
Enable Anti-Aliasing in drawing mode
Controls display quality of an edge for wireframe and hidden-line removal. Normal - Normal quality of edge display. High - Increases tessellation by 2. Very_high - Increases tessellation by 3. Low - Decreases tessellation from normal, speeds up display. Set to a higher value if you have a good graphics card
Enable ambient occlusion. This simulates the effect of light radiating from a real model by darkening the occluded areas
Enable OpenGL full screen anti-aliasing. Enables full-scene anti-aliasing (e.g., 4x) to smooth jagged edges on screen. This makes edges and details appear smoother for better visual quality, though higher settings may slightly impact graphics performance
Enables hlr hashing
Yes - Clear background before displaying text. No - Do not clear text background
Sets the maximum amount of time for an animation between explode states
Yes - Use simplified highlighting which redisplays more quickly at the expense of certain details. This option may increase memory usage slightly
Specifies whether fast hidden line removal is on/off by default
Yes - Unconditionally uses a space hashing in HLR to improve performance. No - Uses a space hashing only when the ratio of edge pairs to edges is more than the given limit
Show curves and sketches in the foreground when using shaded display modes. Added in Creo 11
Determines whether view is animated
Used to set the smoothness of view animation changes. Higher numbers provide more frames/sec, and giving you a smoother animation. Lower numbers cause the view to change more quickly
Allows the user to specify a different graphics library
no - Does not hide set datum planes along with datum planes. yes - Hides set datum planes along with datum planes
Yes - Hidden lines for the intersected bodies and components are accurately removed. This can result in slower performance
Yes - Hidden lines for the intersected bodies in a part mode are accurately removed. This can result in slower performance. Use this to save memory
Display lattice open boundary point sets in Simulation mode only. Controls display of lattice boundary points in Simulation mode
Determines whether or not the system uses Level of Detail in shaded models during dynamic orientation (panning, zooming and spinning). Useful for large assemblies
When lods_enabled is Yes, this value specifies the default value used to display LODs. The value is a percentage of the edge size vs the total size of the model. Useful for large assemblies
When the orientation, or zoom state, of the Creo window changes, an animation sequence of a predefined duration takes place. This option controls the maximum time the system spends animating
Set the upper bound dimension on images loaded into Creo. Images larger than this limit will be rescaled to this upper bound during loading
Turns the blue mesh surface lines on or off
When the orientation, or zoom state, of the Creo window changes, an animation sequence of predefined duration takes place. This option controls the minimum number of frames used in the animation sequence
Sets the path to the file which contains the default model detail option values for new models
Establishes the initial standard view orientation. User_default - System uses X-axis and Y-axis values defined by options x_axis and y_axis
Reorient the model when the annotation plane is set
Model display rotation angle used in Rotate commands. Added in Creo 9
Yes - Automatically update the model with current scene information when saving the model; No - Scene information embedded in model must be updated manually
Yes - Embed applied texture and tracesketch bitmap files into the model file
Spinning shaded images with software graphics only. Note: This option has no effect if your system uses hardware graphics
Set default scene background state
Yes - Shades assembly components while they are being moved. No - Displays components in wireframe while they are being moved
Model shade quality is used to decide how much to subdivide surfaces for shading purposes. Higher shade quality is slower but produces better pictures. Set to a level that is appropriate for your graphics card
Controls the shading of surface features. Set to a level that is appropriate for your graphics card
Enables shading of objects in all windows. This option does not also enable color shading
Controls the display of datum curves on shaded objects
Determines if axes are created for newly extruded arcs
Gives the user the option not to display small shaded surfaces. Disabling this option will improve display quality at the expense of speed. It is most useful for creating screen snap shots. Set to a NO if you have a good graphics card
Choose whether to smooth lines by default or not
Size of Spherical map texture image used for environment mapping. Bigger size will have better image quality but will be slow to regenerate
Allows slower spinning when zoomed in on a model
Yes - 3D feature and model notes are displayed during dynamic spinning of a model. Turn off for large assemblies
Specifies whether datum features will be displayed during dynamic spinning of a model (affects legacy datum planes only)
Yes - Silhouette lines will be displayed during dynamic spinning of a model. Turn off for large assemblies
For display purposes only. Sets the angle between two quilt surfaces below which the edge will be displayed as tangent. Enter an angle between 1.5 and 15 degrees
Determines how edges between tangent surfaces are displayed. Setting this to 'dimmed' displays tangent edges in a subdued gray rather than solid lines. This improves visual clarity by showing tangencies softly without overwhelming the model view
Renders texts with antialiasing in Creo graphics area
Yes - Applied textures will be displayed when the model is shaded. Set to a level that is appropriate for your graphics card
Appends a directory to the search path for textures
Yes - Transparent colors will appear as such when the model is shaded. Set to a level that is appropriate for your graphics card
Update pre-Creo 3.0 appearances to their latest values. Always - update without warning, Never - do not update, Prompt - issue a warning dialog allowing users to choose to update or not
Yes - Use the old stroke-based PTC font as the default font. No - Use a True Type font as the default font
Gamma correction to apply to images created by renderer. Default value is 1.0
Sets the default view orientation for models (appears in the Orientation dialog box). The default orientation is the last option, x_angle, y_angle, or orientation, in the configuration file
Sets the default view orientation for models (appears in the Orientation dialog box). The default orientation is the last option, x_angle, y_angle, or orientation, in the configuration file