Creo Configuration Management Tool
Showing custom category for Creo
Set transparency percentage of shaded (3D) datum planes. 0 - fully transparent. Added in Creo 8
Yes/No/drawing_checked/drawing_unchecked: Whether to allow default templates. Drawing: allows for drawings only, and specifies whether the checkbox should be checked or not by default. Added in Creo 10, Modified in Creo 12
Yes - The last placed surface finish will be selected and attached to the cursor while creating a new surface finish. No - No surface finish will be selected and attached to the cursor by default while creating a surface finish. Added in Creo 9
The last placed symbol will be selected and attached to the cursor while creating a new symbol. Added in Creo 8
This option controls how to handle a url of PDF document in the embedded browser. Added in Creo 10
Specify the default leader length (in model units) of reference designator labels when using 'Reorder Reference Designators' operation in Cabling. Added in Creo 10
Default angular quantity units in material's composite page. deg-The default for a new material is deg. Loaded material's units are not converted; model_units-The default is derived from the model. Loaded material's units are converted to model units. Added in Creo 10
overriding collaboration config options. Added in Creo 10
Specify the prefix applied to the name of a new core. Added in Creo 10
Specify the prefix applied to the sequence of a new core. Added in Creo 10
Specify the prefix applied to the name of a new ply. Added in Creo 10
Specify the prefix applied to the sequence of a new ply. Added in Creo 10
Always assume large deflection in the solver calculations. Added in Creo 8
Define when to show the Study Check dialog before running the Simulation Study. Always, always show the dialog. Warning, show if there are warnings. Never, show only if there are errors. Added in Creo 9
Choose whether to replace the constraints with Inertia Relief to allow solution for unconstrained models. Added in Creo 9
Controls the default expand/collapse state of newly added symbol folders that are added to the pro_symbol_dir path. Expand/collapse state of the existing symbol folders will remain the same. Added in Creo 8
In Seed & Boundary set, consider the bounding surfaces as strong references, by default. Added in Creo 11
Sets the default fit option of standard clearance holes. Added in Creo 8
Controls prompt for object types selection upon custom check in. Added in Creo 8
Display vertices of selected sketch entities in drawing mode. Added in Creo 8
Adjusts the sensitivity of the snapping to geometry. Added in Creo 8
Set the font to use instead of the missing and undefined fonts detected during the import of the .eda file. Added in Creo 9
Defines how to handle the missing fonts when processing the ECAD context data. replace_all replaces all fonts. missing_only replaces only those fonts that are not in found in Creo. Added in Creo 9
Honor and connect as per move specified in GOTO point of next sequence, in case of build operation. Added in Creo 9
If enabled, avoids zero-length automatic plunge motions and corrects the connecting motions. Added in Creo 8
Define the mode used when launching Render Studio. By default, the Automatic mode checks the graphics card and driver to set the mode appropriately. Added in Creo 9
For HSM sequences that use solid tools, the toolpath is trimmed or modified based on the solid tool holder profile for avoiding collisions. Added in Creo 11
Expose all inseparable assemblies operations like "Embed", "Extract", "Create Embedded". Added in Creo 8
Display legacy (2D) datum planes instead of the enhanced 3D shaded version. Added in Creo 8
Enables or disables auto-flipping for all symbols with leaders. Added in Creo 10
If enabled, enforces axis definitions specified by normal surfaces in trajectory tool. Added in Creo 8
Specifies whether to export each ply to a separate DXF/DWG file or to export all plies to the same file. Separate - Each ply is exported to a separate file; Same - All plies are exported to the same file. Added in Creo 10
Specifies whether to export textual information about the area of a ply when exporting it to DXF/DWG file. Added in Creo 10
Specifies whether to export textual information about the center of gravity of a ply when exporting it to DXF/DWG file. Added in Creo 10
Specifies whether to export the constituent fiber angles of a ply when exporting it to DXF/DWG file. Added in Creo 10
Specifies whether to export the fixed warp and weft fibers of a ply when exporting it to DXF/DWG file. Added in Creo 10
Defines the default preferred export file type for exported plies. Added in Creo 10
Specifies whether to export the reference rosette of a ply when exporting it to DXF/DWG file. Added in Creo 10
Specifies whether to export the seed point of a ply when exporting it to DXF/DWG file. Added in Creo 10
Specifies whether to export textual information about the width and length of a ply when exporting it to DXF/DWG file. Added in Creo 10
Specifies the default file name when exporting plies to DXF/DWG file. When exporting each ply to a separate file, the ply name is automatically added as a suffix. Added in Creo 10
Defines the path of the EZ Tolerance Analysis application options file (EZTAAppOptions.xml). Added in Creo 11
Specifies the default name for a flat state representation of a sheet metal part. system - the name is generated automatically. Added in Creo 8
Show curves and sketches in the foreground when using shaded display modes. Added in Creo 11
Sets the method to assign hatch patterns angles to different sectioned components in a section view. Legacy - allows any angle. 6_angles - limits allowed angles to 6 variations. 2_angles - limits allowed angles to 2 variations. Added in Creo 9
Specifies whether to convert only visible non-solid hatch patterns or all patterns when applying the Convert All XCH to PAT command. Visible - only visible non-solid patterns are converted. All - Solid, excluded and hidden patterns are converted as well. Added in Creo 9
Specifies which hatch galleries display patterns converted from XCH to PAT. Added in Creo 9
Sets the longest allowed time, in seconds, it takes to update the hatch display after changing one of its settings. Added in Creo 9
Specifies the angle interval when you rotate a hatch pattern using rotation commands. Enter an integer between 1 to 180. Added in Creo 9
Defines the default scale value of a hatch pattern when applying it to a new section in a drawing view. fit_to_view- Uses the base value defined by the scale configuration file and scales it to fit the view outline. fixed- Uses the base value defined by the scale configuration file. Added in Creo 9
If set to no, and both TAP and TAPERED file types are present in the location given in hole_parameter_file_path, then do not load the system-provided .hol files. Added in Creo 8
Sets the font type to which the imported text symbols mapped when you import non-native drawings into new drawings in Creo. Added in Creo 8
Controls whether hatches are converted to corresponding DXF/DWG entities, represented as separate lines or exported as blocks. Added in Creo 9
Controls whether splines are converted to corresponding DXF/DWG entities or exported as polylines. Added in Creo 9
yes*-Preserves high-degree B-spline surfaces in imported models. This value is set by default. no-Approximates imported models' high-degree B-spline surfaces into third-degree spline surfaces. Added in Creo 8
Fill the empty body of the import template part with imported geometry if there are no other bodies in the template part. Added in Creo 8
Added in Creo 10
Select Yes to make the placement connection enabled after inserting a Manikin. Added in Creo 10
When performing planar movement with the 3D dragger by entering a value for translation along axis, lock the dimension of the orthogonal axis. Added in Creo 10
Sets the number of latest contributing features to display in the model tree (2-20, all). Added in Creo 9
Specify whether the cutcom output for area turning is separate for each slice. Added in Creo 10
Refresh the graphics screen. Added in Creo 10
Defines the file that contains the user-defined NC sequence parameters list. Added in Creo 9
Enable the CL player for synchronized NC sequences. Added in Creo 10
Yes - Outputs the feed rate statement in the NCL file, even if the first feed rate of the current HSM sequence is identical to the last feed rate of the previous HSM sequence. Added in Creo 9
yes - Ask for confirmation before proceeding with stock model recomputation. no - Cancel stock model recomputation with no confirmation. auto_compute - Recompute the stock model automatically with no confirmation. Added in Creo 9
Set to 'Yes' will scan and clean undesired cutting data parameters of the tool referred in the relations. Added in Creo 8
Specifies the default directory for storing stock model information in stk file format. Use the full pathname to avoid problems. If nothing is set, the working directory is used. Added in Creo 9
Specifies whether the approach and exit tool motions are created considering the new rectangular thread cycle in the ISO thread turning sequence. Added in Creo 10
If set to YES, the entry and exit motions are modified for a single slice and made consistent with or without Approach Walls in a Volume milling sequence. Added in Creo 9
yes - Issue a warning when a feature used in synchronization is being deleted or suppressed. Also, issue a warning when launching synchronization again if such a feature has been deleted or suppressed. Added in Creo 8
Determine selection priority in Model Tree when selecting elements from the graphic window. Added in Creo 8
Show notification when feature does not meet standard. Added in Creo 8
Show notifications for features that have geometry checks. Added in Creo 11
Check local references in all features. Added in Creo 11
Specifies the placement of plies when multiple plies are exported to the same DXF/DWG file. aligned - Plies are placed on top of each other. offset - Plies are placed with an offset from each other. separate - Each ply is placed in an individual sheet. Added in Creo 10
Define whether reference models of Data Sharing Features will be regenerated. Added in Creo 10
Resets the note in standard hole when editing the feature definition. Added in Creo 8
Controls the visibility of Save, Add to Palette, Move in Palette and Delete commands in the symbol palette. By Default, these commands are available. Added in Creo 8
Define whether the referenced by relations models will be retrieved to the session by default. Added in Creo 10
Model display rotation angle used in Rotate commands. Added in Creo 9
Yes - Make quilts a higher priority than quilt surfaces in the selection filter. No - Quilt surfaces will have a higher priority. Added in Creo 11
Show or hide material preview by default. Added in Creo 9
Define how automatic contact creation will be handled for inactive studies. Only applicable if contacts are present in the model. Added in Creo 9
Sets the default setting to create parameters and note in simple Hole. Added in Creo 10
Set dimension background transparency when working in Sketcher. 100 is fully transparent. Added in Creo 8
Specifies the number of references that can be stored for sketching guidance when you sketch geometry in Sketcher, Layout, and the modern sketching tools in Drawing. Added in Creo 8
Display lines and arrows of highlighted dimensions in Sketcher using thick lines. Added in Creo 8
Specify whether or not to display geometry locks in Sketcher. Added in Creo 11
Controls the display of subgroup centerlines. Yes - subgroup centerlines are displayed. Added in Creo 11
Controls the display of subgroup construction entities. Yes - subgroups construction entities are displayed. Added in Creo 11
Controls the display of subgroup coordinate systems. Yes - subgroup coordinate systems are displayed. Added in Creo 11
Controls the display of subgroup points. Yes - subgroup points are displayed. Added in Creo 11
Controls whether to highlight intersecting geometry. Added in Creo 9
Controls whether to highlight geometry junctions. Added in Creo 9
Controls whether to highlight overlapping geometry. Added in Creo 9
Controls whether to auto scale imported geometry in sketcher or to set the default value of the scaling factor to 1. Added in Creo 11
Specifies the name format for a flat state instance of a sheet metal part. Added in Creo 11
Defines the options that appear in the Flat pattern drop-down list. Representation, instance, or both. Added in Creo 11
Specifies the name format for a flat state representation of a sheet metal part. Added in Creo 11
Set to show or hide shaded (3D) datum planes during camera operations such as zoom, pan and rotate. Added in Creo 8
Sets the default import model type when opening a STEP assembly. Added in Creo 11
Sets the default import model type when opening a STEP multibody part. Added in Creo 11
Sets the default import model type when opening a STEP multibody part. Added in Creo 11
Suppress HSM toolpath calculation progress window. Added in Creo 9
Defines if the 'With Leader-Free Point' placement option is available in the shortcut menu when creating surface finish in Drawing mode. Added in Creo 9
Activates the repeat surface finish creation mode. Added in Creo 9
Specifies the maximum quality of surface triangulation used in surface analyses. Added in Creo 11
Defines if the 'With Leader-Free Point' placement option is available in the shortcut menu when creating symbol in Drawing mode. Added in Creo 8
Activates the repeat symbol creation mode. Added in Creo 8
Controls showing system symbols in the Gallery. Added in Creo 8
Number of excel columns imprted in table. Added in Creo 11
Number of excel rows import in table. Added in Creo 11
yes - If the tip with Flashed orientation does not have an offset number, the tip uses the offset number of the corresponding tip with Standard orientation and outputs it in the NCL file. Added in Creo 8
Choose whether to export from all levels be default or only from currently active level. Added in Creo 11
Choose a default export type, Creo-Weld - .xml structured file, Or xMCF - a .xml structured file as defined by ISO 8329. Added in Creo 11
Determines whether Weld features must be connected to a Joint Members feature. Added in Creo 11