ConfigWiz - Piping

aec_dwg_anno_attrpar_spec_file

Specifies the aec drawing annotation attribute/parameter specification file name

Default: aec_dwg_anno_attrparam_spec.ptd

aec_object_type_file

Specifies the aec object type file name

Default: aec_object_type.ptd

display_thick_insulation

Yes - Display insulation in thick mode. No - Display insulation in centerline mode. This option can be overridden by the Thick insulation option in the Model Display dialog box

Default: yes

display_thick_pipes

Yes - Display pipes in thick mode. No - Display pipes in centerline mode. This option can be overridden by the Thick pipes option in the Model Display dialog box

Default: no

isogen_attribute_map_file

Specifies the mapping between isogen parameter and attribute name

Default: <installation-path>\text\piping_data\isodata\isogen_attribute_map.csv

isogen_endtype_map_file

Specify name of file mapping Pro/Piping endtypes with ISOGEN endtypes

Default: <installation-path>\text\piping_data\isodata\isogen_endtype_map.csv

isogen_mandatory_attr_file

Specify file containing mandatory attribute filenames used by ISOGEN

Default: isogen.fls

isogen_nominal_size_map_file

Specify name of file mapping Pro/Piping Size with Nominal Sizes in MM and Inches

Default: <installation-path>\text\piping_data\isodata\isogen_nominal_size_map.csv

isogen_output_files_dir

Specify directory to save the PCFs created by ISOGEN interface

Default: (No Value)

isogen_pcf_filename_format

Specify format to create filenames of PCF files being created

Default: mnemonic,-,specification,-,number

isogen_symbol_map_file

Specify name of file for mapping Pro/Piping selection names with ISOGEN symbol keys (SKEY)s

Default: <installation-path>\text\piping_data\isodata\isogen_symbol_map.csv

pipe_3d_bend_theor_int_pts

Yes - Displays theoretical intersections and bends in three-dimensional models

Default: no

pipe_bend_locations_csys_units

Define which assembly units will be used for the piping bend locations calculations. Yes - to use coordinate system assembly units. No - to use pipeline assembly units

Default: no

pipe_pre_22_bendinfo_conv

Convert bend report information generated prior to Pro/ENGINEER 2000i-2 to current saved analysis format

Default: yes

pipe_solid_centerline

Yes - Display Pro/PIPING centerlines. No - Do not display Pro/PIPING centerlines

Default: yes

pipe_solid_label_format

Specify the pipe solid label format that will be used to automatically generate pipeline labels

Default: size,-,specification,-,mnemonic,-,number,-,insulation

pipe_update_pre_20_int_pts

Yes - Pipelines created prior to Release 20.0 are updated with intersection point entities. The entities are created in session by Info>Regen Info or when you retrieve the model

Default: no

pipeline_assembly_library_dir

Sets the default pipeline assembly library directory

Default: <installation-path>\text\piping_data\pipelinelib\

pipeline_assembly_name_format

Sets the default pipeline assembly name format

Default: mnemonic,-,number

pipeline_label_format

Specify the pipeline label format that will be used to automatically generate pipeline labels

Default: size,-,specification,-,mnemonic,-,number,-,insulation

pipeline_solid_start_part_name

Sets the default pipeline solid start part name

Default: pipeline_solid_start.prt

pipeline_spool_label_format

Specify the pipeline spool label format that will be used to generate the spool labels during pipeline spool generation

Default: mnemonic-number-prefix[0]spoolnum[01]suffix[]

pipeline_start_assembly_name

Sets the default pipeline start assembly name

Default: pipeline_start.asm

piping_appearance_map_file

Sets the default piping appearance map filename

Default: <installation-path>\text\piping_data\master_catalog\piping_appearance.map

piping_bolt_nut_select_file

Piping bolts and nuts selection file

Default: <installation-path>\text\piping_data\master_catalog\piping_bolt_nut_select.csv

piping_design_method

Sets the current Piping design method for pipeline modeling

Default: user_driven

piping_enable_designate_report

Enable designatable reports for spec-driven piping

Default: yes

piping_end_compatibility_file

Sets the default piping end compatibility filename

Default: <installation-path>\text\piping_data\master_catalog\piping_end_compatibility.csv

piping_extend_dim_scheme

Specify a dimension scheme for piping extend segment

Default: cartesian

piping_extend_show_csys

Control whether small preview CSYS is shown at end of pipe when defining extend features in cartesian / spherical / cylindrical schemes

Default: no

piping_fitt_angle_tolerance

Sets the default piping fitting angle tolerance value

Default: 1.5

piping_fitt_category_map_file

Sets the default piping fitting category map filename

Default: <installation-path>\text\piping_data\sample_project\piping_fitt_category_map.csv

piping_fitt_library_dir

Sets the default piping fitting library directory

Default: <installation-path>\text\piping_data\fittinglib\

piping_fluid_parameter

Enables/disables the Parameters tab in Create Pipeline Dialog

Default: no

piping_insulation_dir_file

Sets the default piping insulation directory filename

Default: <installation-path>\text\piping_data\sample_project\piping_insulation_dir.csv

piping_joint_fitting_clearance

Sets the piping joint minimum fitting clearance value

Default: 1

piping_joint_fitting_offset

Sets the piping joint minimum fitting offset value

Default: 1

piping_manufacture_dir_file

Sets the default piping manufacture directory filename

Default: <installation-path>\text\piping_data\master_catalog\piping_manufacture_dir.ptd

piping_material_file

Sets the default piping material filename

Default: <installation-path>\text\piping_data\master_catalog\piping_material.ptd

piping_material_source

Sets the source for material information. Note Material_dir requires pro_material_dir to be set

Default: weight_length

piping_mcat_dir

Sets the default piping master catalog directory

Default: <installation-path>\text\piping_data\master_catalog\

piping_mcat_dir_file

Sets the default piping master catalog directory filename

Default: <installation-path>\text\piping_data\master_catalog\piping_mcat_dir.csv

piping_min_bolting_clearance

Sets the default piping minimum bolting clearance value

Default: 1

piping_old_mcat_format

Enable\Disable the use of the old master catalog piping data

Default: no

piping_project_data_dir

Sets the default Project data directory

Default: <installation-path>\text\piping_data\sample_project\

piping_schematic_driven

Set the Schematic Driven Pipeline Modeling ON/OFF

Default: no

piping_schematic_xml_dir

Specify directory with full path containing schematic information XML file(s)

Default: <working-directory>

piping_spec_dir_file

Sets the default piping specification directory filename

Default: <installation-path>\text\piping_data\sample_project\piping_spec_dir.csv

piping_system_tree_format

Sets the default piping model tree format

Default: mnemonic

piping_thumb_wheel_increment

Sets the default piping thumb wheel increment value

Default: 1

piping_thumb_wheel_ratio_inc

Sets the default piping thumb wheel ratio increment value

Default: 0.01

piping_wildfire_convert

Always ask before converting old piping assemblies to update the network structure

Default: manual

pro_insulation_dir

Specifies the directory to search for insulation files used in Pro/PIPING. Use full path name to avoid problems

Default: (No Value)

pro_pip_fitt_dir

Specifies the directory to search for fittings used in Pro/PIPING

Default: (No Value)

pro_pip_lnstk_dir

Specifies the directory to search for linestock files used in Pro/PIPING. Use full path name to avoid problems

Default: (No Value)

units_system_dic_file

Specifies the file containing the mapping for MCAT filename and units

Default: <installation-path>\text\piping_data\master_catalog\piping_units_system_dic_file.ptd