ConfigWiz - Sheetmetal

die_models_directory

Sets path to directory that contains the die models

Default: (No Value)

enable_flat_state

Enables the creation of a flat state instance of the model. The instance can be fully flat or fully formed

Default: no

flange_shape_sketches_directory

Sets path to directory that contains the Flange shapes

Default: (No Value)

flat_shape_sketches_directory

Sets path to directory that contains the Flat shapes

Default: (No Value)

flat_simp_rep_name

Specifies the default name for a flat state representation of a sheet metal part. system - the name is generated automatically. Added in Creo 8

Default: system

initial_bend_y_factor

Specifies a constant used to determine the neutral bend line for a sheet metal part. This value is always used for non-cylindrical bends. It is used for regular bends only when no bend table is specified

Default: 0.5

material_upd_smt_bend_table

Defines whether assignment of material to the model via Creo Toolkit will overwrite existing bend table data and y factor value. Always Replace - Overwrites existing data. Never Replace - Keeps existing data

Default: always_replace

pro_sheet_met_dir

Sets the default directory of your user-defined bend tables. If not set, the Pro/SHEETMETAL supplied bend tables are used. Use the full path name to avoid problems

Default: (No Value)

pro_smt_params_dir

Specifies the directory to save/retrieve Sheet metal parameters files. Use full path name to avoid problems

Default: (No Value)

punch_axis_points

Yes - Enables the creation of punch axis points in Sheetmetal cuts and punches

Default: no

punch_models_directory

Sets path to directory that contains the punch models

Default: (No Value)

smt_add_bends_on_sharp_edges

Determines if bends will be added automatically on edges with sharp geometry in the wall creation tools. Yes - bends will be added automatically. No - sharp geometry of edges will be kept

Default: yes

smt_allow_flip_sketch

Yes - Allows flipping the sketch in Flat and Flange tools. No - Disables the ability to flip the sketch in Flat and Flange tools

Default: no

smt_bend_notes_dflt_display

Define the default state of bend note display (sheetmetal mode)

Default: yes

smt_bend_notes_direction_down

Define the down direction symbol for bend notes (sheetmetal mode)

Default: default

smt_bend_notes_direction_up

Define the up direction symbol for bend notes (sheetmetal mode)

Default: default

smt_bend_notes_order

Define the fields order for bend notes (sheetmetal mode)

Default: &type&direction&angle

smt_bend_notes_type_formed

Define the formed symbol for bend notes (sheetmetal mode)

Default: default

smt_bend_notes_type_rolled

Define the rolled symbol for bend notes (sheetmetal mode)

Default: default

smt_crn_rel_display

Yes - Corner relief notes will be displayed. No - Corner relief notes will not be displayed

Default: no

smt_drive_bend_by_parameters

Sheetmetal bend radius and bend angle values and bend dimension location will be driven by feature level relations to Sheetmetal parameters

Default: no

smt_drive_tools_by_parameters

Drives the Sheetmetal options and values by feature-level relations to Sheetmetal parameters

Default: yes

smt_flat_rep_inst_option

Defines the options that appear in the Flat pattern drop-down list. Representation, instance, or both. Added in Creo 11

Default: instance & representation

smt_form_abort_on_fail_plc

Yes - will always fail the Sheetmetal Form feature if there is a problem with its placement

Default: no

smt_mp_method

MASS - Suppressed Flat Pattern and Flatten Forms will be temporary resumed before mass properties calculation of sheetmetal part. CG - Mass Properties calculation will be performed on current state of sheetmetal part. BOTH - Both methods will be used one after the other

Default: cg

smt_outside_mold_lines

Yes - Outside Mold Lines will be created during Flat Pattern creation

Default: no