ConfigWiz - Weld

add_weld_mp

Yes - System includes welds when calculating mass properties and approximates lightweight weld mass properties. No - System excludes welds when calculating mass properties

Default: no

pro_weld_params_dir

Specifies the directory to search when a weld parameter file is needed

Default: (No Value)

weld_ask_xsec_refs

No - Do not ask for X-section references when creating weld features. Yes - Ask for X-section references when creating weld features

Default: no

weld_color

Defines the default color for welds. The three decimal values specify, in this order, the percentage of red, green, and blue in the resulting color. For example, 0 0 49 specifies a medium blue. Defines default color for welds

Default: 0.000000 0.000000 0.000000

weld_dec_places

Sets the default number of decimal places (0-10) to display in weld parameters

Default: 3

weld_edge_prep_driven_by

Determines if the edge preparation feature is created in the part or the assembly level

Default: part

weld_edge_prep_groove_angle

Specifies an initial default value for the angle cut edge preparation

Default: 45

weld_edge_prep_groove_depth

Specifies an initial default value for the edge preparation depth

Default: 0.25

weld_edge_prep_instance

Controls whether a family table instance is created for edge preparation. Yes - Instances of the components that receive edge preparation are created

Default: (No Value)

weld_edge_prep_name_suffix

Specifies the suffix name for the instance that will be created during edge preparation. Part name plus extension makes the instance name

Default: _noep

weld_edge_prep_root_open

Specifies an initial default value for the root opening edge preparation

Default: 0.25

weld_edge_prep_visibility

Applies only if weld_edge_prep is set to Yes. Generic - Edge preparation features are resumed in the generic and suppressed in the instance. Instance - Edge preparation features are suppressed in the generic and resumed in the instance

Default: (No Value)

weld_export_all_levels

Choose whether to export from all levels be default or only from currently active level. Added in Creo 11

Default: yes

weld_export_type

Choose a default export type, Creo-Weld - .xml structured file, Or xMCF - a .xml structured file as defined by ISO 8329. Added in Creo 11

Default: creo_xml

weld_geom_type_default

Sets the default weld geometry type. Spot welds cannot use solid geometry. so when Solid is the default, spot welds are created using surface geometry

Default: surface

weld_notch_corner_radius

Specifies an initial default value for the radius at weld notch corner

Default: 0.1

weld_notch_height

Specifies an initial default value for the weld notch height

Default: 0.4

weld_notch_radius

Specifies an initial default value for the weld notch radius

Default: 0.5

weld_notch_width

Specifies an initial default value for the weld notch width

Default: 0.5

weld_ui_standard

Specifies standard for welding user interface. ANSI - Use ANSI standards. ISO - Use ISO standards. Set to ansi

Default: ansi